}
Shopping cart
Total: 0.00 €
...
Secondary currency 
Rate may be different from PayPal rate.
 
Custom/Discount code or
Email address to track order
 
PayPal Acceptance MarkPayPal Buyer Protection Mark
Terms and Conditions, Privacy • Copyright • Contact

Raspberry Pi B+/2B/3B all-metal FLANGED Case

This case is designed for the the Raspberry Pi 1 model B+, the Raspberry Pi 2 model B and the Raspberry Pi 3 model B computers and is intended to be fixed to a wall or similar surface. It offers entirely-metal sturdy design intended to protect the Pi but giving full and easy access to all outside connectors and LEDs. There are also dedicated openings for the display and camera ribbon cables. Memory cards can be changed without hassle thanks to the dedicated opening for the memory card slot. The Pi is attached by using included M2.5 screws. Case flange has four round ∅ 3.5 mm holes for 3 mm screws. Case cover is attached by M2.5 screws and can be removed in seconds even while the case is fixed in its place. The case has acrylic paint finish available in Light Grey (RAL 7035), Grey (RAL 7001), and Black (RAL 9005).

Make it outstanding by adding color! Select color from our colors list and let us know!

We accept orders for CUSTOM cases with company logos and other branding – contact us!

SPECIFICATIONS & FEATURES

Mount Flange, ∅ 3.5 mm x 4
70 x 43 mm (2.76 x .69 in)
Material Steel
Finish Acrylic
Size 60 x 23.7 x 91 mm
(2.36 x 0.93 x 3.58 in)
Size including flange 78 x 30.6 x 91 mm
(3.07 x 1.20 x 3.58 in)
Weight 71 g
Accessible connectors LAN, USB, A/V, HDMI, Power
Raspberry Pi models(1) Pi 1 model B+
Pi 2 model B
Pi 3 model B
Raspberry Pi attached by M2.5 screws x 4
LEDs visible ALL
Memory card accessible Yes
Opening or display cable Yes
Opening for camera cable Yes
Intended use Indoor only
Color:Light grey (RAL 7035)
Price:16.95 €
Qty:
Color:Silver grey (RAL 7001)
Price:16.95 €
Qty:
Color:Jet black (RAL 9005)
Price:16.95 €
Qty:
   

Case Dimensions

Installation instructions
Notes: 1. This case is NOT suitable for Raspberry Pi 1 models A, A+ and B;
2. As the case metal is thin please be careful when inserting the cover screws and do not overtighten them;
3. When attaching the Pi please insert the Ethernet and USB connectors first – see instructions;
4. Do not use solvents for cleaning the case as this can damage the paint finish, use wet cloth instead;
5. Color rendition may depend on monitor, camera settings and lighting, please refer to the RAL chart to get a review of the color. Different colors and further customization are possible by request;
6. Raspberry Pi is not included!