}
Shopping cart
Total: 0.00 €
...
Secondary currency 
Rate may be different from PayPal rate.
 
Custom/Discount code or
Email address to track order
 
PayPal Acceptance MarkPayPal Buyer Protection Mark
Terms and Conditions, Privacy • Copyright • Contact

The Beaglebone Black all-metal DIN-RAIL Case!

This is the DIN-rail-mount version of the Beaglebone Black DESKTOP case, it is also similar to the Beaglebone Black FLANGED case. This case can be attached to both 7.5 mm and 15 mm EN 50022 DIN rails known also as Top hat section, Type O, Type Ω, or TS35.

The case is made of steel light and strong enough to protect the Beaglebone. All connectors are accessible excluding internal headers. The MMC card slot is also accessible. All LEDs are visible through dedicated openings. The back wall has a cut forming a push-out panel which if needed can create an opening for a standard DB9/15 connector. If not used this cut is almost indiscernible above the memory card slot. The board is attached inside the case by using included M3 screws. Case cover is also attached by M3 screws. The case has acrylic paint finish. Available in Light Grey (RAL 7035). Grey (RAL 7001) and Black (RAL 9005).

Make it outstanding by adding color! Select color from our colors list and let us know!

We accept orders for CUSTOM cases with company logos and other branding – contact us!

Color:Light grey (RAL 7035)
Price:17.95 €
Qty:
Color:Silver grey (RAL 7001)
Price:17.95 €
Qty:
Color:Jet black (RAL 9005)
Price:17.95 €
Qty:
 
Notes: 1.

This case is suitable for EN 50022 rails - both 7.5 mm and 15 mm, known also as Top hat section, Type O, Type Ω, or TS35.

This case is NOT suitable for C section rails known also as C-type, or C20, C30, C40, C50, and G section rails known also as G-type, or EN 50035, BG 5825, and DIN 46277-1;

 
2.

As the case metal is thin please be careful when inserting the cover screws and do not overtighten them;

3.

When attaching the Beaglebone Black please insert the ethernet connector first, then slightly bend the opposite side of the case and insert the HDMI connector - see instructions;

4.

When attaching entire assembly to the DIN rail please attach the rear hook first, then pull the DIN rail lock until it stops, press the case against the DIN rail, and release the lock. Do not attach to the DIN rail by simply pressing entire assembly against the rail until it clicks in place - see instructions;

5.

Do not use solvents for cleaning the case as this can damage the paint finish, use wet cloth instead;

6.

Indoor use only!

7.

Color rendition may depend on monitor, camera settings and lighting, please refer to the RAL chart to get a review of the color. Different colors and further customization are possible by request;

8.

Beaglebone Black is not included!

3D CAD Rendering

Case Dimensions

Installation inctructions